Installation Instruction

How to Install Inside Mount Cellular Shades

• Position the Mounting Brackets: Place the brackets 2 1⁄2 inches in from each side of
  your window opening along the top of the window frame. Ensure the front of each
  bracket is evenly aligned.
•  Mark Screw Locations: Use a pencil to mark the screw positions for each bracket.
• Ensure Brackets Are Level: Use a level tool or steel measuring tape to confirm the
  brackets are straight.
• Create Starter Holes: Tap a screw gently with a hammer or use a drill bit to create
  starter holes for easier screw fastening.
• Secure the Brackets: Insert screws to firmly secure the brackets in place.
• Install Additional Support Brackets: For wider shades, additional center support
  brackets may be required. Position and secure them as needed.
  
• Attach the Headrail: Hook the front edge of the headrail into the brackets. Push
  upward on the back of the headrail until it snaps into place.
  
• Test Your Shades: Lower the shades slowly to ensure even movement. Test the
  stopping feature to adjust the shades to your desired height.

How to Install Outside Mount Cellular Shades

• Position the Shade: Place the shade on the wall surface or window trim, ensuring it is
  centered and level.
  
• Mark the Bracket Locations: Use a pencil to mark the top of the headrail 2 1⁄2 inches in
  from the left and right outside edges of the shade.
  
• Prepare Starter Holes: Create starter holes by tapping a screw with a hammer or using
  a drill bit. Use drywall anchors for mounting into drywall without studs.
  
• Install the Brackets: Align the top of the left bracket with the inside of your pencil line
  and secure it with screws. Repeat for the right bracket.
  
• Install Additional Support Brackets: For wider shades, add and secure center support
  brackets for stability.
  
• Attach the Headrail: Hook the front of the headrail into the brackets and push upward
  on the back until it snaps securely into place.
  
• Test Your Shades: Lower the shades by pulling the cord toward the center. To raise or
  lock the shade in place, pull the cord to the right.